Skip to content

Programming Bluey with the Nordic nRF52-DK

Note: A similar procedure will work with the nRF51-DK as well.

nRF52-DK + Bluey

Connect the DK to Bluey as follows:

nRF52-DK Bluey
VTG VDD
SWDIO SWDIO
SWDCLK SWCLK
GND DETECT GND
GND GND

Ensure that Bluey is powered - either via coin cell or externally.

Now, just issue make flash_softdevice and make flash commands as usual from your command shell, and code will be uploaded by the DK on to bluey.